Rockford Fosgate R2-1200X1 Prime 1200 Watt Mono Amplifier
Rockford Fosgate R2-1200X1 Prime 1200 Watt Mono Class D Amplifier
When your subwoofer demands serious power, the R2-1200X1 delivers 1200 watts of efficient Class D performance with the tuning tools to control every dimension of your bass.
Product Overview
The R2-1200X1 is part of Rockford Fosgate's 3rd generation Prime Series, developed for car audio enthusiasts who want a high-output monoblock amplifier without stepping beyond an accessible price point. Rated at 1200 watts RMS into 1 ohm, it operates as a Class D monoblock designed specifically for subwoofer duty, with a frequency response limited to 20-250 Hz and support for 4 ohm, 2 ohm, and 1 ohm mono configurations. This 1-ohm stability makes it compatible with a wide range of dual voice coil subwoofer wiring options. Beyond raw power, the R2-1200X1 is equipped with an integrated Punch EQ for up to 18 dB of bass boost at 45 Hz, a variable Infrasonic Filter to protect the subwoofer from damaging subsonic frequencies, and an included RLC Remote Level Control for convenient bass adjustment from the driver's seat. MEHSA 4 thermal management and Rollback Protection ensure sustained reliability under high-demand conditions, while NOMAD actively monitors outputs against shorts and impedance faults. Greater than 80% average efficiency means lower current draw relative to output, reducing the electrical burden on the vehicle's charging system. Designed and engineered in Tempe, Arizona, the R2-1200X1 is built by fanatics, for fanatics.
Features & Benefits
C.L.E.A.N. Technology (Patent 8,712,066): Rockford Fosgate's patented Calibrated Level Eliminates Audible Noise circuit uses dedicated input and output clip LEDs (C.L.E.A.N. IN Red, C.L.E.A.N. OUT Blue/Red) to accurately match the source unit's output to the amplifier's input sensitivity, removing distortion before it reaches the subwoofer.
P.O.W.E.R. Supply: Onboard power supply design that continues to generate output above the rated RMS figure as vehicle voltage increases, so real-world performance scales beyond the spec sheet across the 9-16V operating range.
Integrated Punch EQ: Continuously variable onboard bass equaliser providing 0 to +18 dB of boost at 45 Hz, correcting for acoustic deficiencies in the listening environment and delivering up to 3x the perceived bass without an external processor.
Variable Infrasonic Filter: Adjustable high-pass filter operating from 15 to 40 Hz at 12 dB/octave Butterworth, removing subsonic frequencies that cause excessive cone excursion and voice coil stress without contributing audible bass output.
MEHSA 4 (Maximum Efficiency Heat Sink Application): Advanced thermal management system that reduces MOSFET operating temperatures, lowers distortion levels, increases overall durability, and extends the lifespan of output devices under sustained high-power use.
Rollback Protection: During demanding musical conditions, the amplifier dynamically reduces power demand to prevent stress on output devices, preserving both the amplifier and the connected subwoofer under real-world listening conditions.
NOMAD Protection: A real-time analogue computer that continuously monitors the amplifier's speaker output and protects against shorted speaker wires and dangerously low speaker impedances, providing active fault management rather than passive fusing alone.
Balanced Differential Inputs: Differential input topology eliminates noise picked up by signal cables between the source unit and amplifier, delivering a cleaner signal into the amplifier stage.
1-Ohm Stable Operation: Supports 4 ohm, 2 ohm, and 1 ohm mono loads, giving full compatibility with dual voice coil subwoofers wired to 1 ohm and maximising available output power for high-excursion applications.
Includes RLC Remote Level Control: A remote level control is included in the box, allowing bass output to be adjusted from the driver's seat without accessing the amplifier directly.
High Level Input Capable: Accepts both low-level RCA (150mV-4V) and high-level speaker signals (450mV-12V), making integration with factory head units straightforward.
Auto-Sense RAP Bypass: Auto-Sense bypass switch supports vehicles with Retained Accessory Power (RAP), allowing the amplifier to power on and off correctly using speaker-level signal detection without requiring a dedicated remote turn-on wire.
RCA Pass-Through Outputs: 2-channel RCA pass-through remains active with both RCA and high-level inputs, allowing a full-range amplifier to be added downstream without splitting cables at the head unit.
CTA-2006 and CE Compliant: All power ratings verified at 14.4V with 1% or less THD to CTA-2006 industry standards, with no inflated peak figures used anywhere in the specifications.
Technical Specs
| Specification | Detail |
|---|---|
| SKU | R2-1200X1 |
| Series | Prime |
| Number of Channels | 1 |
| Amplifier Class | Class D |
| Total RMS Power | 1200W |
| RMS Power @ 4 Ohm | 400W x 1 |
| RMS Power @ 2 Ohm | 800W x 1 |
| RMS Power @ 1 Ohm | 1200W x 1 |
| Dynamic Power @ 4 Ohm | 489W x 1 |
| Dynamic Power @ 2 Ohm | 889W x 1 |
| Dynamic Power @ 1 Ohm | 1389W x 1 |
| Bridgeable | No |
| Minimum Impedance | 1 Ohm |
| Frequency Response | 20 Hz - 250 Hz |
| THD @ 4 Ohm | <1.0% |
| THD @ 2 Ohm | <1.0% |
| THD @ 1 Ohm | <1.0% |
| Average Efficiency | >80% |
| Input Sensitivity (Low-Level) | 150 mV - 4V |
| Input Sensitivity (High-Level) | 450 mV - 12V |
| Signal Input | 2 x RCA low-level, 4-Pin Molex high-level |
| Signal Output | 2 x RCA pass-through (active with RCA or high-level input) |
| Punch EQ | 0 to +18 dB @ 45 Hz |
| Low-Pass Crossover | 50-250 Hz @ 12 dB/octave Butterworth |
| Infrasonic Filter | 15-40 Hz @ 12 dB/octave Butterworth |
| Remote Controls | Yes (RLC Remote Level Control included) |
| Visual Indicators | POWER (Blue), PROTECT (Red), C.L.E.A.N. IN (Red), C.L.E.A.N. OUT (Blue/Red) |
| Operating Voltage | 9-16V DC |
| Max Current Draw (13.8V Sinewave) | 121A |
| Recommended Fuse | 200A (not included) |
| Power Wire Gauge | 4 AWG |
| Speaker Wire Gauge | 8 AWG |
| Power Input Connector | Compression Terminal Block |
| Speaker Output Connector | Compression Terminal Block |
| Cooling | Convection / Heatsink (MEHSA 4) |
| Dimensions (H x W x D) | 1.9" x 6.8" x 11.3" (4.9 cm x 17.3 cm x 28.5 cm) |
| Warranty | 1 Year |
| Compliance | CTA-2006, CE |
Goes Well With
The R2-1200X1 is built to drive Rockford Fosgate Prime R2 and Punch P2 subwoofers hard, including the R2D2-12, R2D4-12, P2D2-12, and P2D4-12, with dual voice coil variants wiring cleanly to the 1-ohm or 2-ohm load the amplifier handles most efficiently. A high-current amplifier wiring kit is essential given the 121A maximum current draw, with 4-gauge power and ground cable as the minimum specification. A quality pair of RCA interconnects is recommended for clean signal transfer from the head unit. For systems requiring speaker channel amplification alongside this monoblock, the R2-1200X1 pairs directly with the R2-300X4 or R2-200X2 using the onboard RCA pass-through output.
Frequently Asked Questions
What subwoofer impedance works best with the R2-1200X1?
The R2-1200X1 delivers its full rated 1200 watts RMS into a 1-ohm mono load, making it best suited to dual voice coil subwoofers wired in parallel to reach 1 ohm. It also operates at 800 watts into 2 ohms and 400 watts into 4 ohms, giving flexibility across a wide range of subwoofer configurations. Confirm the final wired impedance of the subwoofer before connecting to avoid operating below the 1-ohm minimum.
What does the Infrasonic Filter do, and why does it matter at 1200 watts?
The variable Infrasonic Filter removes subsonic frequencies below 15-40 Hz (adjustable) that are inaudible to the human ear but cause extreme cone excursion and voice coil stress, particularly at high power. At 1200 watts, uncontrolled subsonic content can quickly exceed a subwoofer's mechanical limits. Setting the Infrasonic Filter correctly protects the subwoofer and allows the amplifier to focus its full output within the audible bass range.
Does the R2-1200X1 include a remote bass control?
Yes. An RLC Remote Level Control is included in the box. It connects to the remote level control input on the amplifier and allows the driver to adjust bass output from a convenient dash-mounted position without accessing the amplifier directly, which is especially practical when the amplifier is installed in a boot or under a seat.
What does Rollback Protection do at high power levels?
During sustained high-demand listening conditions, Rollback Protection dynamically reduces the amplifier's power output to prevent thermal stress on the output devices. Rather than triggering a full protection shutdown, it maintains audio playback at a reduced level, protecting both the amplifier and the connected subwoofer while keeping the system running.
What wiring is required for the R2-1200X1, and is the fuse included?
The R2-1200X1 requires 4 AWG power and ground wire using the onboard compression terminal block connectors and 8 AWG speaker wire for the subwoofer output. The recommended 200A fuse is not included in the box and must be sourced separately. Given the 121A maximum current draw, the fuse must be installed in the power cable as close to the battery as possible to protect the vehicle's wiring.
Original: $466.41
-65%$466.41
$163.24Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rockford Fosgate R2-1200X1 Prime 1200 Watt Mono Class D Amplifier
When your subwoofer demands serious power, the R2-1200X1 delivers 1200 watts of efficient Class D performance with the tuning tools to control every dimension of your bass.
Product Overview
The R2-1200X1 is part of Rockford Fosgate's 3rd generation Prime Series, developed for car audio enthusiasts who want a high-output monoblock amplifier without stepping beyond an accessible price point. Rated at 1200 watts RMS into 1 ohm, it operates as a Class D monoblock designed specifically for subwoofer duty, with a frequency response limited to 20-250 Hz and support for 4 ohm, 2 ohm, and 1 ohm mono configurations. This 1-ohm stability makes it compatible with a wide range of dual voice coil subwoofer wiring options. Beyond raw power, the R2-1200X1 is equipped with an integrated Punch EQ for up to 18 dB of bass boost at 45 Hz, a variable Infrasonic Filter to protect the subwoofer from damaging subsonic frequencies, and an included RLC Remote Level Control for convenient bass adjustment from the driver's seat. MEHSA 4 thermal management and Rollback Protection ensure sustained reliability under high-demand conditions, while NOMAD actively monitors outputs against shorts and impedance faults. Greater than 80% average efficiency means lower current draw relative to output, reducing the electrical burden on the vehicle's charging system. Designed and engineered in Tempe, Arizona, the R2-1200X1 is built by fanatics, for fanatics.
Features & Benefits
C.L.E.A.N. Technology (Patent 8,712,066): Rockford Fosgate's patented Calibrated Level Eliminates Audible Noise circuit uses dedicated input and output clip LEDs (C.L.E.A.N. IN Red, C.L.E.A.N. OUT Blue/Red) to accurately match the source unit's output to the amplifier's input sensitivity, removing distortion before it reaches the subwoofer.
P.O.W.E.R. Supply: Onboard power supply design that continues to generate output above the rated RMS figure as vehicle voltage increases, so real-world performance scales beyond the spec sheet across the 9-16V operating range.
Integrated Punch EQ: Continuously variable onboard bass equaliser providing 0 to +18 dB of boost at 45 Hz, correcting for acoustic deficiencies in the listening environment and delivering up to 3x the perceived bass without an external processor.
Variable Infrasonic Filter: Adjustable high-pass filter operating from 15 to 40 Hz at 12 dB/octave Butterworth, removing subsonic frequencies that cause excessive cone excursion and voice coil stress without contributing audible bass output.
MEHSA 4 (Maximum Efficiency Heat Sink Application): Advanced thermal management system that reduces MOSFET operating temperatures, lowers distortion levels, increases overall durability, and extends the lifespan of output devices under sustained high-power use.
Rollback Protection: During demanding musical conditions, the amplifier dynamically reduces power demand to prevent stress on output devices, preserving both the amplifier and the connected subwoofer under real-world listening conditions.
NOMAD Protection: A real-time analogue computer that continuously monitors the amplifier's speaker output and protects against shorted speaker wires and dangerously low speaker impedances, providing active fault management rather than passive fusing alone.
Balanced Differential Inputs: Differential input topology eliminates noise picked up by signal cables between the source unit and amplifier, delivering a cleaner signal into the amplifier stage.
1-Ohm Stable Operation: Supports 4 ohm, 2 ohm, and 1 ohm mono loads, giving full compatibility with dual voice coil subwoofers wired to 1 ohm and maximising available output power for high-excursion applications.
Includes RLC Remote Level Control: A remote level control is included in the box, allowing bass output to be adjusted from the driver's seat without accessing the amplifier directly.
High Level Input Capable: Accepts both low-level RCA (150mV-4V) and high-level speaker signals (450mV-12V), making integration with factory head units straightforward.
Auto-Sense RAP Bypass: Auto-Sense bypass switch supports vehicles with Retained Accessory Power (RAP), allowing the amplifier to power on and off correctly using speaker-level signal detection without requiring a dedicated remote turn-on wire.
RCA Pass-Through Outputs: 2-channel RCA pass-through remains active with both RCA and high-level inputs, allowing a full-range amplifier to be added downstream without splitting cables at the head unit.
CTA-2006 and CE Compliant: All power ratings verified at 14.4V with 1% or less THD to CTA-2006 industry standards, with no inflated peak figures used anywhere in the specifications.
Technical Specs
| Specification | Detail |
|---|---|
| SKU | R2-1200X1 |
| Series | Prime |
| Number of Channels | 1 |
| Amplifier Class | Class D |
| Total RMS Power | 1200W |
| RMS Power @ 4 Ohm | 400W x 1 |
| RMS Power @ 2 Ohm | 800W x 1 |
| RMS Power @ 1 Ohm | 1200W x 1 |
| Dynamic Power @ 4 Ohm | 489W x 1 |
| Dynamic Power @ 2 Ohm | 889W x 1 |
| Dynamic Power @ 1 Ohm | 1389W x 1 |
| Bridgeable | No |
| Minimum Impedance | 1 Ohm |
| Frequency Response | 20 Hz - 250 Hz |
| THD @ 4 Ohm | <1.0% |
| THD @ 2 Ohm | <1.0% |
| THD @ 1 Ohm | <1.0% |
| Average Efficiency | >80% |
| Input Sensitivity (Low-Level) | 150 mV - 4V |
| Input Sensitivity (High-Level) | 450 mV - 12V |
| Signal Input | 2 x RCA low-level, 4-Pin Molex high-level |
| Signal Output | 2 x RCA pass-through (active with RCA or high-level input) |
| Punch EQ | 0 to +18 dB @ 45 Hz |
| Low-Pass Crossover | 50-250 Hz @ 12 dB/octave Butterworth |
| Infrasonic Filter | 15-40 Hz @ 12 dB/octave Butterworth |
| Remote Controls | Yes (RLC Remote Level Control included) |
| Visual Indicators | POWER (Blue), PROTECT (Red), C.L.E.A.N. IN (Red), C.L.E.A.N. OUT (Blue/Red) |
| Operating Voltage | 9-16V DC |
| Max Current Draw (13.8V Sinewave) | 121A |
| Recommended Fuse | 200A (not included) |
| Power Wire Gauge | 4 AWG |
| Speaker Wire Gauge | 8 AWG |
| Power Input Connector | Compression Terminal Block |
| Speaker Output Connector | Compression Terminal Block |
| Cooling | Convection / Heatsink (MEHSA 4) |
| Dimensions (H x W x D) | 1.9" x 6.8" x 11.3" (4.9 cm x 17.3 cm x 28.5 cm) |
| Warranty | 1 Year |
| Compliance | CTA-2006, CE |
Goes Well With
The R2-1200X1 is built to drive Rockford Fosgate Prime R2 and Punch P2 subwoofers hard, including the R2D2-12, R2D4-12, P2D2-12, and P2D4-12, with dual voice coil variants wiring cleanly to the 1-ohm or 2-ohm load the amplifier handles most efficiently. A high-current amplifier wiring kit is essential given the 121A maximum current draw, with 4-gauge power and ground cable as the minimum specification. A quality pair of RCA interconnects is recommended for clean signal transfer from the head unit. For systems requiring speaker channel amplification alongside this monoblock, the R2-1200X1 pairs directly with the R2-300X4 or R2-200X2 using the onboard RCA pass-through output.
Frequently Asked Questions
What subwoofer impedance works best with the R2-1200X1?
The R2-1200X1 delivers its full rated 1200 watts RMS into a 1-ohm mono load, making it best suited to dual voice coil subwoofers wired in parallel to reach 1 ohm. It also operates at 800 watts into 2 ohms and 400 watts into 4 ohms, giving flexibility across a wide range of subwoofer configurations. Confirm the final wired impedance of the subwoofer before connecting to avoid operating below the 1-ohm minimum.
What does the Infrasonic Filter do, and why does it matter at 1200 watts?
The variable Infrasonic Filter removes subsonic frequencies below 15-40 Hz (adjustable) that are inaudible to the human ear but cause extreme cone excursion and voice coil stress, particularly at high power. At 1200 watts, uncontrolled subsonic content can quickly exceed a subwoofer's mechanical limits. Setting the Infrasonic Filter correctly protects the subwoofer and allows the amplifier to focus its full output within the audible bass range.
Does the R2-1200X1 include a remote bass control?
Yes. An RLC Remote Level Control is included in the box. It connects to the remote level control input on the amplifier and allows the driver to adjust bass output from a convenient dash-mounted position without accessing the amplifier directly, which is especially practical when the amplifier is installed in a boot or under a seat.
What does Rollback Protection do at high power levels?
During sustained high-demand listening conditions, Rollback Protection dynamically reduces the amplifier's power output to prevent thermal stress on the output devices. Rather than triggering a full protection shutdown, it maintains audio playback at a reduced level, protecting both the amplifier and the connected subwoofer while keeping the system running.
What wiring is required for the R2-1200X1, and is the fuse included?
The R2-1200X1 requires 4 AWG power and ground wire using the onboard compression terminal block connectors and 8 AWG speaker wire for the subwoofer output. The recommended 200A fuse is not included in the box and must be sourced separately. Given the 121A maximum current draw, the fuse must be installed in the power cable as close to the battery as possible to protect the vehicle's wiring.
