STEDI CARBON-PANEL Carbon Switch Panel With USB & Digital Volt Meter - 12V

12v Switch Panel with USB & Digital Voltage Meter

Carbon Switch Panel Wiring Instructions:
The panel utilizes one main power input and ground, has a dual USB charger, a voltmeter and 4x 12v outputs.

1. Main Ground
2. Main 12v Input
3. The Voltage Sense Wire (Should Go Directly to The Battery)
4. Voltage Meter 12v Power Source (Ignition, or Pushbutton)
5. Voltage Meter Ground
6. 12v Output 1
7. 12v Output 2
8. 12v Output 3
9. 12v Output 4

Wiring Notes:
Pin 1/5 can be wired together for simplicity, and pin 4/2 can be wired together to the panel's main power source (relay to the battery). Although the switches are rated for 20 amps, the gauge of wire #2 and #1 limit the output of the switches (wires 6,7,8,9) to about 3-5 amps each.

Any higher load would need to be used with a relay. A relay would not be needed for smaller loads, such as a fridge, strip light, work light, or low current accessory.

Features:

• Twin Port USB 5V USB 3.1A each
• Digital Voltage Display
• Display Range 0 - 30 Volts
• 4 x Dime Switches With Blue LED Indicator (Rated At 20A Each)
• Pre-Wired Connectors & Pig Tails
• Aluminium Panel With Hydro-Dipped Carbon Fiber Print.

Key Measurements:

• Panel Width: 82mm
• Panel Height: 160mm
• Minimum Depth Required: 60mm (Behind Panel)

What’s In The Box:

• 1 x Switch Panel with USB & Digital Volt Meter