Rockford Fosgate R2-2X10 Prime Dual R2 10" 1000W Sealed Loaded Enclosure
Rockford Fosgate R2-2X10 Prime Dual 10 Inch Sealed Loaded Subwoofer Enclosure
A pre-built, pre-wired sealed enclosure loaded with two R2D2-10 10 inch dual voice coil subwoofers handling 500W RMS and 1000W peak, internally wired to a 2-ohm load. Constructed from 5/8 inch MDF with OEM-grade carpet covering and high current binding posts. Just add an amplifier for complete bass performance straight out of the box. Backed by a 1 year warranty.
Product Overview
The Rockford Fosgate R2-2X10 is a complete sealed loaded subwoofer enclosure from the Prime R2 series, housing two R2D2-10 10 inch dual voice coil subwoofers in a pre-built, pre-wired cabinet ready for drop-in installation. The enclosure is internally wired to present a 2-ohm load at the amplifier terminals, removing the need for any internal wiring work at installation.
The enclosure is constructed from 5/8 inch MDF (medium density fiberboard) for rigid, resonance-free cabinet walls, covered with OEM-grade carpet for a factory-quality finish. High current binding posts accept up to 12 AWG speaker wire for a secure, low-resistance connection. Both subwoofers carry CEA-2031 certified power handling and Klippel Verified certification, confirming that the rated performance specifications are accurately measured and reproduced. The R2-2X10 is the more compact alternative to the R2-2X12, offering the same 500W RMS power handling in a smaller footprint suited to vehicles with tighter boot or cargo space constraints.
Features & Benefits
Pre-Built, Pre-Wired - Drop-In Installation: The R2-2X10 arrives fully assembled and internally wired, presenting a 2-ohm load at the binding posts. No internal enclosure wiring or speaker installation is required. Connect an amplifier and the system is ready to use straight out of the box.
Dual R2D2-10 10 Inch Subwoofers - 500W RMS Combined: Two R2D2-10 dual voice coil subwoofers handle a combined 500W RMS and 1000W peak, delivering powerful bass performance in a more compact footprint than the dual 12 inch R2-2X12.
Internally Wired to 2-Ohm Load: The enclosure is pre-wired to present a stable 2-ohm load at the amplifier binding posts, simplifying amplifier selection and ensuring optimal power transfer from a compatible 2-ohm stable monoblock or 2-channel amplifier.
5/8 Inch MDF Construction with OEM-Grade Carpet: The enclosure walls are built from 5/8 inch medium density fiberboard for a rigid, resonance-free cabinet, covered in OEM-grade carpet for a clean, factory-quality finish that suits most vehicle interiors.
High Current Binding Posts - Up to 12 AWG: The high current binding posts accept speaker cable up to 12 AWG, providing a secure, low-resistance connection between the amplifier and the loaded enclosure.
Klippel Verified and CEA-2031 Certified: Both subwoofers carry Klippel Verified certification, confirming that the measured performance specifications are accurately represented. CEA-2031 certified power handling ensures the rated wattage figures reflect real-world performance, not inflated marketing numbers.
Technical Specs
| Specification | Detail |
|---|---|
| SKU | R2-2X10 |
| Enclosure Type | Sealed |
| Woofer Quantity | 2 |
| Woofer Size | 10 inch |
| Woofer Series | R2D2-10 |
| Nominal Impedance (each) | 2 Ohm (dual voice coil) |
| Amplifier Load | 2 Ohm (internally pre-wired) |
| Power Handling | 500W RMS / 1000W Peak |
| Enclosure Material | 5/8 inch MDF |
| Enclosure Finish | OEM-Grade Carpet |
| Speaker Connector | High Current Binding Posts (up to 12 AWG) |
| Dimensions (H x W x D) | 310 x 765 x 308mm (12.20 x 30.12 x 12.11 inch) |
| CEA-2031 Compliant | Yes |
| Certifications | Klippel Verified |
| Shipping Weight | 16.5kg |
| Warranty | 1 Year |
Compatible With / Goes Well With
The R2-2X10 suits a wide range of vehicle applications where a pre-built dual 10 inch sealed subwoofer enclosure can be accommodated in the boot or cargo area. At 310mm high x 765mm wide x 308mm deep, it is more compact than the R2-2X12 and is well suited to hatchbacks, sedans, and SUVs with tighter cargo space. The enclosure presents a 2-ohm load and is best paired with a monoblock amplifier rated at 500W RMS at 2 ohms, or a bridged 2-channel amplifier with equivalent 2-ohm stable output.
Goes Well With:
- P1000X2 - Rockford Fosgate Prime 1000W 2-channel amplifier, bridgeable to mono for direct pairing with the R2-2X10 at 2 ohms
- P500X2 - Prime 500W 2-channel amplifier for a matched Prime series system build
- R2-2X12 - Larger dual 12 inch version of this enclosure for applications with more boot space and a desire for deeper bass extension
- RFK4 - Rockford Fosgate 4 AWG amplifier wiring kit to complete the amplifier installation alongside the R2-2X10
- RFK8 - Rockford Fosgate 8 AWG amplifier wiring kit for lower power amplifier pairings
Frequently Asked Questions
Does the R2-2X10 require any internal wiring or speaker installation?
No. The R2-2X10 arrives fully pre-built and pre-wired with both subwoofers already installed and internally connected to a 2-ohm load at the binding posts. All that is required at installation is connecting an external amplifier to the high current binding posts using speaker cable up to 12 AWG.
What amplifier do I need for the R2-2X10?
The R2-2X10 presents a 2-ohm load and handles 500W RMS combined. For best results, pair it with a monoblock amplifier rated at 500W RMS at 2 ohms, or a 2-channel amplifier that is 2-ohm stable when bridged to mono at equivalent power. Contact us if you need help selecting a compatible amplifier for your system.
What is the difference between the R2-2X10 and the R2-2X12?
Both enclosures handle 500W RMS and use the same pre-built, pre-wired 2-ohm sealed cabinet design. The key differences are physical size and bass character. The R2-2X10 is more compact at 310 x 765 x 308mm and is better suited to vehicles with limited boot space. The R2-2X12 is larger at 365 x 865 x 450mm and delivers deeper bass extension due to the greater cone area of the 12 inch subwoofers. Choose the R2-2X10 for space-constrained installations, or the R2-2X12 if maximum bass depth is the priority.
What are the enclosure dimensions and will it fit my vehicle?
The R2-2X10 measures 310mm high x 765mm wide x 308mm deep (12.20 x 30.12 x 12.11 inches). It is recommended to measure your boot or cargo area carefully and compare against these dimensions before purchasing to confirm fitment in your specific vehicle.
Why is the enclosure wired to 2 ohms and what amplifier impedance does that require?
Each R2D2-10 subwoofer has a dual voice coil configuration. The internal wiring combines both subwoofers to present a single 2-ohm load at the binding posts. This is a common and efficient impedance for monoblock amplifiers to deliver their rated power. Ensure your chosen amplifier is rated as 2-ohm stable to get the full 500W RMS from this enclosure.
Original: $411.35
-65%$411.35
$143.97Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rockford Fosgate R2-2X10 Prime Dual 10 Inch Sealed Loaded Subwoofer Enclosure
A pre-built, pre-wired sealed enclosure loaded with two R2D2-10 10 inch dual voice coil subwoofers handling 500W RMS and 1000W peak, internally wired to a 2-ohm load. Constructed from 5/8 inch MDF with OEM-grade carpet covering and high current binding posts. Just add an amplifier for complete bass performance straight out of the box. Backed by a 1 year warranty.
Product Overview
The Rockford Fosgate R2-2X10 is a complete sealed loaded subwoofer enclosure from the Prime R2 series, housing two R2D2-10 10 inch dual voice coil subwoofers in a pre-built, pre-wired cabinet ready for drop-in installation. The enclosure is internally wired to present a 2-ohm load at the amplifier terminals, removing the need for any internal wiring work at installation.
The enclosure is constructed from 5/8 inch MDF (medium density fiberboard) for rigid, resonance-free cabinet walls, covered with OEM-grade carpet for a factory-quality finish. High current binding posts accept up to 12 AWG speaker wire for a secure, low-resistance connection. Both subwoofers carry CEA-2031 certified power handling and Klippel Verified certification, confirming that the rated performance specifications are accurately measured and reproduced. The R2-2X10 is the more compact alternative to the R2-2X12, offering the same 500W RMS power handling in a smaller footprint suited to vehicles with tighter boot or cargo space constraints.
Features & Benefits
Pre-Built, Pre-Wired - Drop-In Installation: The R2-2X10 arrives fully assembled and internally wired, presenting a 2-ohm load at the binding posts. No internal enclosure wiring or speaker installation is required. Connect an amplifier and the system is ready to use straight out of the box.
Dual R2D2-10 10 Inch Subwoofers - 500W RMS Combined: Two R2D2-10 dual voice coil subwoofers handle a combined 500W RMS and 1000W peak, delivering powerful bass performance in a more compact footprint than the dual 12 inch R2-2X12.
Internally Wired to 2-Ohm Load: The enclosure is pre-wired to present a stable 2-ohm load at the amplifier binding posts, simplifying amplifier selection and ensuring optimal power transfer from a compatible 2-ohm stable monoblock or 2-channel amplifier.
5/8 Inch MDF Construction with OEM-Grade Carpet: The enclosure walls are built from 5/8 inch medium density fiberboard for a rigid, resonance-free cabinet, covered in OEM-grade carpet for a clean, factory-quality finish that suits most vehicle interiors.
High Current Binding Posts - Up to 12 AWG: The high current binding posts accept speaker cable up to 12 AWG, providing a secure, low-resistance connection between the amplifier and the loaded enclosure.
Klippel Verified and CEA-2031 Certified: Both subwoofers carry Klippel Verified certification, confirming that the measured performance specifications are accurately represented. CEA-2031 certified power handling ensures the rated wattage figures reflect real-world performance, not inflated marketing numbers.
Technical Specs
| Specification | Detail |
|---|---|
| SKU | R2-2X10 |
| Enclosure Type | Sealed |
| Woofer Quantity | 2 |
| Woofer Size | 10 inch |
| Woofer Series | R2D2-10 |
| Nominal Impedance (each) | 2 Ohm (dual voice coil) |
| Amplifier Load | 2 Ohm (internally pre-wired) |
| Power Handling | 500W RMS / 1000W Peak |
| Enclosure Material | 5/8 inch MDF |
| Enclosure Finish | OEM-Grade Carpet |
| Speaker Connector | High Current Binding Posts (up to 12 AWG) |
| Dimensions (H x W x D) | 310 x 765 x 308mm (12.20 x 30.12 x 12.11 inch) |
| CEA-2031 Compliant | Yes |
| Certifications | Klippel Verified |
| Shipping Weight | 16.5kg |
| Warranty | 1 Year |
Compatible With / Goes Well With
The R2-2X10 suits a wide range of vehicle applications where a pre-built dual 10 inch sealed subwoofer enclosure can be accommodated in the boot or cargo area. At 310mm high x 765mm wide x 308mm deep, it is more compact than the R2-2X12 and is well suited to hatchbacks, sedans, and SUVs with tighter cargo space. The enclosure presents a 2-ohm load and is best paired with a monoblock amplifier rated at 500W RMS at 2 ohms, or a bridged 2-channel amplifier with equivalent 2-ohm stable output.
Goes Well With:
- P1000X2 - Rockford Fosgate Prime 1000W 2-channel amplifier, bridgeable to mono for direct pairing with the R2-2X10 at 2 ohms
- P500X2 - Prime 500W 2-channel amplifier for a matched Prime series system build
- R2-2X12 - Larger dual 12 inch version of this enclosure for applications with more boot space and a desire for deeper bass extension
- RFK4 - Rockford Fosgate 4 AWG amplifier wiring kit to complete the amplifier installation alongside the R2-2X10
- RFK8 - Rockford Fosgate 8 AWG amplifier wiring kit for lower power amplifier pairings
Frequently Asked Questions
Does the R2-2X10 require any internal wiring or speaker installation?
No. The R2-2X10 arrives fully pre-built and pre-wired with both subwoofers already installed and internally connected to a 2-ohm load at the binding posts. All that is required at installation is connecting an external amplifier to the high current binding posts using speaker cable up to 12 AWG.
What amplifier do I need for the R2-2X10?
The R2-2X10 presents a 2-ohm load and handles 500W RMS combined. For best results, pair it with a monoblock amplifier rated at 500W RMS at 2 ohms, or a 2-channel amplifier that is 2-ohm stable when bridged to mono at equivalent power. Contact us if you need help selecting a compatible amplifier for your system.
What is the difference between the R2-2X10 and the R2-2X12?
Both enclosures handle 500W RMS and use the same pre-built, pre-wired 2-ohm sealed cabinet design. The key differences are physical size and bass character. The R2-2X10 is more compact at 310 x 765 x 308mm and is better suited to vehicles with limited boot space. The R2-2X12 is larger at 365 x 865 x 450mm and delivers deeper bass extension due to the greater cone area of the 12 inch subwoofers. Choose the R2-2X10 for space-constrained installations, or the R2-2X12 if maximum bass depth is the priority.
What are the enclosure dimensions and will it fit my vehicle?
The R2-2X10 measures 310mm high x 765mm wide x 308mm deep (12.20 x 30.12 x 12.11 inches). It is recommended to measure your boot or cargo area carefully and compare against these dimensions before purchasing to confirm fitment in your specific vehicle.
Why is the enclosure wired to 2 ohms and what amplifier impedance does that require?
Each R2D2-10 subwoofer has a dual voice coil configuration. The internal wiring combines both subwoofers to present a single 2-ohm load at the binding posts. This is a common and efficient impedance for monoblock amplifiers to deliver their rated power. Ensure your chosen amplifier is rated as 2-ohm stable to get the full 500W RMS from this enclosure.
