DNA RVS010F 10 Metre Male to Female RCA Video Cable with Power Wire

10 Metres of Clean Video Signal RCA Male to Female with Power Wire.

---

Product Overview

The DNA Automotive RVS010F is a 10 metre RCA video extension cable with male RCA plug on one end, female RCA socket on the other, and a power wire running the full length. It is the longer sibling of the RVS006F designed for installations where 6 metres is not enough to reach from the camera or video source to the display or headunit. Ten metres covers longer-wheelbase vehicles, larger vans, bus conversions, motorhomes, and caravan-to-tow-vehicle camera runs that exceed the typical 6 metre requirement.

As with the RVS006F, the included power wire runs the full cable length, allowing both video signal and camera power to be routed in a single pass through trims, panels, and under carpets keeping the installation tidy and reducing the number of individual cables run through the vehicle.

---

Key Specifications

• Part Number: RVS010F
• Brand: DNA Automotive
• Cable Type: RCA video extension
• Connector End 1: Male RCA plug
• Connector End 2: Female RCA socket
• Includes: Power wire (full length)
• Cable Length: 10 metres
• Packaging: Blister & Card
• Cable Gauge (power wire): Not specified — confirm with supplier
• Video Signal Type: Not specified — confirm with supplier
• Shielding: Not specified — confirm with supplier

---

Features & Benefits

• 10 metre length — for longer vehicle and tow camera runs — Where the 6 metre RVS006F falls short, the RVS010F picks up. Ten metres handles longer-wheelbase utes and vans, motorhomes, bus conversions, and caravan tow camera setups where the camera is mounted on the caravan or trailer and the cable must run back through a tow harness or along the vehicle to a cabin display.
• Male RCA to female RCA — extend or connect — The male-to-female configuration extends an existing RCA cable or connects directly between a camera's male RCA output and a headunit or monitor's female RCA input. Plug in, route, done.
• Power wire included — single cable run — The full-length power wire runs alongside the video cable, keeping both signal and camera power in one tidy run through door trims, headliners, and under-carpet routing. Fewer cables, cleaner installation.
• Purpose-built for rear camera and driving aid installations — The 10 metre length is specifically suited to applications where the camera is further from the display than a standard 6 metre cable can bridge — tow bars on long-wheelbase vehicles, caravan-mounted cameras, and extended cab or body van setups.

---

Technical Specs

---

Compatible With / Goes Well With

Typical Applications:

• Long-run reverse camera video signal extension
• Caravan and trailer tow camera video cable
• Motorhome and bus conversion rear camera runs
• Blind spot and side camera installations on larger vehicles
• Any 12V AV installation requiring a 10 metre RCA video run

Goes Well With:

• Reverse cameras with RCA video output
• Aftermarket headunits with RCA video input
• Rear-view monitors with RCA input
• DNA RVS006F (6 metre version — for shorter runs)

---

Frequently Asked Questions

When should I choose the 10 metre cable over the 6 metre RVS006F?

Choose the RVS010F when your camera-to-display run exceeds 6 metres — common in long-wheelbase utes, vans, motorhomes, and caravan tow camera setups where the camera is mounted further from the cabin than a 6 metre cable can reach.

Can this cable extend an existing shorter RCA video cable?

Yes. Connect the male RCA plug to the female socket of an existing cable and run the female socket end of the RVS010F to your headunit or display, adding 10 metres to the total cable run.

Does the power wire run the full 10 metres?

Yes — the power wire is included and runs the full 10 metre length, allowing both video signal and camera power to be routed together in a single cable pass through the vehicle.

Is this cable suitable for a caravan or trailer tow camera?

Yes — the 10 metre length is specifically suited to caravan and trailer camera setups where the camera is mounted at the rear of the trailer and the cable must run back through a connector or along the tow vehicle to reach the cabin display. Confirm the total cable run for your specific setup before ordering.

What is the power wire gauge?

Power wire gauge is not confirmed in the available product data. Contact us or refer to DNA Automotive's product documentation if wire gauge is a requirement for your installation.