CRC 5035 Tac 2 Adhesive Lubricant Spray 300g
CRC 5035 Tac 2 Adhesive Lubricant Spray 300g
Heavy-duty adhesive lubricant spray that penetrates deep into chain pin and bushing areas and wire rope strands before thickening into a tenacious long-lasting lubricant film, resistant to cold, heat, salt water washoff, and sling-off across a wide -25°C to 165°C operating range for chain drives, open gears, wire ropes, pulleys, and conveyor systems.
Product Overview
The CRC 5035 Tac 2 is a professional-grade adhesive lubricant spray engineered for the demanding lubrication requirements of chain drives, open gears, wire ropes, pulleys, and conveyor systems in automotive, industrial, agricultural, and marine environments. Unlike conventional spray lubricants that coat only the outer surface of a chain or wire rope, the CRC Tac 2 uses a penetrating low-viscosity carrier solvent that carries the lubricant deep into chain pin and bushing contact areas and between the individual wire strands of wire ropes, reaching the internal wear surfaces where lubrication is most critical. Once applied, the carrier evaporates and the lubricant thickens and cures into a tenacious, adhesive film that clings to metal surfaces and resists the centrifugal sling-off forces generated by high-speed chain drives, pulleys, and rotating components that cause conventional spray lubricants to be thrown clear of the lubrication zone within minutes of application. The wide -25°C to 165°C operating temperature range makes the Tac 2 effective from sub-zero cold storage and refrigeration conveyor applications through to high-temperature industrial and engine bay chain drive environments where standard lubricants degrade or thin out. Resistance to cold, hot, and salt water washoff maintains lubrication in wet environments including marine applications, outdoor conveyor systems, and agricultural equipment subject to rain and washdown. The combination of wear reduction, friction reduction, and noise dampening properties addresses the three primary effects of inadequate chain lubrication — premature chain and sprocket wear, increased drive friction and energy loss, and noisy chain operation from metal-to-metal contact. The 300g aerosol format provides a practical supply for workshop and field maintenance use with a directional nozzle for targeted application to chain runs, gear teeth, and wire rope sections.
Features & Benefits
Deep Penetrating Application: The low-viscosity carrier solvent penetrates into chain pin and bushing contact areas and wire rope strand interstices before thickening, delivering lubricant to the internal wear surfaces where friction and wear actually occur, rather than coating only the outer chain surface.
Tenacious Adhesive Film: After penetration, the lubricant thickens and cures into an adhesive film that clings tenaciously to metal surfaces, resisting centrifugal sling-off from high-speed chain drives, pulleys, and rotating components that quickly throw clear conventional spray lubricants.
Wide Temperature Range -25°C to 165°C: Active across a wide operating temperature range from -25°C to 165°C, covering cold storage and refrigeration conveyor applications, standard ambient industrial and agricultural environments, and high-temperature engine bay and industrial chain drive conditions where standard lubricants degrade.
Resists Cold, Hot, and Salt Water Washoff: Maintains lubrication in wet operating environments including marine vessel applications, outdoor conveyor systems, agricultural machinery subject to rain and irrigation, and equipment subject to regular high-pressure washdowns.
Sling-Off Resistant: The adhesive formulation resists centrifugal sling-off forces generated by fast-moving chain and drive components, maintaining the lubricant film on the chain surface for longer between application intervals compared to conventional spray lubricants.
Reduces Wear and Friction: Lubricates internal chain pin and bushing contact surfaces, reducing metal-to-metal wear at the primary chain wear points and lowering drive friction, contributing to extended chain and sprocket service life and reduced drive energy consumption.
Reduces Noisy Chain Systems: Metal-to-metal contact between inadequately lubricated chain pins, bushings, and drive sprockets is a common source of chain drive noise. Regular application of Tac 2 maintains the lubricant film at contact surfaces, dampening noise and providing a smoother, quieter drive.
Stable and Long-Lasting: The adhesive film provides a more durable lubrication interval than conventional spray lubricants, reducing the frequency of reapplication required on chain drives and wire rope systems in regular service.
Wide Application Range: Suitable for chain drives, open gears, pulleys, wire ropes, conveyors, and any open drive system requiring a penetrating, adhesive lubricant that will remain in place under demanding operating conditions.
Technical Specs
| Specification | Detail |
|---|---|
| Part Number | 5035 |
| Contents | 300g |
| Format | Aerosol Spray |
| Lubricant Type | Adhesive Penetrating Lubricant |
| Operating Temperature | -25°C to 165°C |
| Washoff Resistance | Cold, Hot, Salt Water |
| Sling-Off Resistant | Yes |
| Applications | Chain Drives, Open Gears, Wire Ropes, Pulleys, Conveyors |
| Warranty | Manufacturer's Defect |
Compatible With / Goes Well With
The CRC 5035 Tac 2 is suited to any automotive, industrial, agricultural, or marine application requiring a heavy-duty penetrating adhesive chain and drive lubricant. Primary applications include motorcycle and bicycle chain drives, automotive and agricultural timing and drive chains, industrial conveyor chain systems, open gear drives on mining and processing equipment, wire rope rigging and hoisting equipment on marine vessels and cranes, agricultural machinery drive chains, forklift and materials handling chain drives, and any open drive system subject to wet, high-temperature, or high-speed operating conditions.
Pairs well with CRC 5013 Auto Electronic Cleaner for a complete workshop chemical maintenance kit, CRC chain degreaser and drive cleaner for removing old lubricant and contamination before reapplying Tac 2, anti-corrosion sprays for complementary metal protection alongside lubrication, and workshop chemical storage solutions for safe aerosol product storage.
Frequently Asked Questions
What makes the Tac 2 different from a standard spray lubricant like WD-40 or chain oil?
Standard spray lubricants and penetrating oils typically use a light-viscosity carrier that provides short-term lubrication but lacks the adhesive properties to remain on fast-moving chain and drive surfaces. WD-40 in particular is primarily a water displacer and light penetrant rather than a heavy-duty chain lubricant. The CRC Tac 2 is formulated to penetrate deeply into chain pin and bushing areas before thickening into an adhesive film that resists sling-off and washoff under demanding operating conditions, providing significantly longer-lasting lubrication at the internal wear surfaces of chain drives and wire ropes.
How often should the Tac 2 be applied to chain drives?
Application frequency depends on the operating conditions, chain speed, load, and environment. As a general guide, chains operating in dirty, wet, or high-temperature environments require more frequent application than lightly loaded chains in clean, dry conditions. For most standard chain drive applications, applying Tac 2 at regular service intervals or when audible chain noise returns is a practical maintenance approach. For high-duty cycle industrial and agricultural chain drives, follow the equipment manufacturer's recommended lubrication interval and adjust based on observed lubricant condition during maintenance inspections.
Can the Tac 2 be used on motorcycle chains?
Yes. The Tac 2's penetrating adhesive formula, sling-off resistance, and wide temperature range make it well suited to motorcycle chain drives, which operate at high speeds and are exposed to road grime, water, and temperature extremes. Apply to a clean, dry chain with the motorcycle on a stand, rotating the wheel to work the spray around the full chain run and allowing the carrier to evaporate before riding.
Is the Tac 2 suitable for wire rope and rigging applications?
Yes. The penetrating carrier solvent carries the lubricant between the individual wire strands of wire rope where internal wear between strands occurs during bending cycles over sheaves and drum surfaces. The resulting adhesive film resists washoff from marine environments, rain, and humidity, making the Tac 2 suitable for hoisting wire ropes, rigging cables, and wire rope on marine vessels, cranes, and lifting equipment subject to wet operating conditions.
What temperature range is the Tac 2 suitable for?
The CRC Tac 2 is active across a wide operating temperature range from -25°C to 165°C. At the lower end, this covers cold storage and refrigeration conveyor applications and cold-climate outdoor machinery. At the upper end, the 165°C upper limit covers engine bay chain drives, industrial oven conveyor chains, and high-temperature processing equipment chain systems where standard lubricants would thin out, oxidise, or burn off. Always confirm the specific operating temperature of your application falls within this range before using the Tac 2.
Original: $18.80
-65%$18.80
$6.58Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
CRC 5035 Tac 2 Adhesive Lubricant Spray 300g
Heavy-duty adhesive lubricant spray that penetrates deep into chain pin and bushing areas and wire rope strands before thickening into a tenacious long-lasting lubricant film, resistant to cold, heat, salt water washoff, and sling-off across a wide -25°C to 165°C operating range for chain drives, open gears, wire ropes, pulleys, and conveyor systems.
Product Overview
The CRC 5035 Tac 2 is a professional-grade adhesive lubricant spray engineered for the demanding lubrication requirements of chain drives, open gears, wire ropes, pulleys, and conveyor systems in automotive, industrial, agricultural, and marine environments. Unlike conventional spray lubricants that coat only the outer surface of a chain or wire rope, the CRC Tac 2 uses a penetrating low-viscosity carrier solvent that carries the lubricant deep into chain pin and bushing contact areas and between the individual wire strands of wire ropes, reaching the internal wear surfaces where lubrication is most critical. Once applied, the carrier evaporates and the lubricant thickens and cures into a tenacious, adhesive film that clings to metal surfaces and resists the centrifugal sling-off forces generated by high-speed chain drives, pulleys, and rotating components that cause conventional spray lubricants to be thrown clear of the lubrication zone within minutes of application. The wide -25°C to 165°C operating temperature range makes the Tac 2 effective from sub-zero cold storage and refrigeration conveyor applications through to high-temperature industrial and engine bay chain drive environments where standard lubricants degrade or thin out. Resistance to cold, hot, and salt water washoff maintains lubrication in wet environments including marine applications, outdoor conveyor systems, and agricultural equipment subject to rain and washdown. The combination of wear reduction, friction reduction, and noise dampening properties addresses the three primary effects of inadequate chain lubrication — premature chain and sprocket wear, increased drive friction and energy loss, and noisy chain operation from metal-to-metal contact. The 300g aerosol format provides a practical supply for workshop and field maintenance use with a directional nozzle for targeted application to chain runs, gear teeth, and wire rope sections.
Features & Benefits
Deep Penetrating Application: The low-viscosity carrier solvent penetrates into chain pin and bushing contact areas and wire rope strand interstices before thickening, delivering lubricant to the internal wear surfaces where friction and wear actually occur, rather than coating only the outer chain surface.
Tenacious Adhesive Film: After penetration, the lubricant thickens and cures into an adhesive film that clings tenaciously to metal surfaces, resisting centrifugal sling-off from high-speed chain drives, pulleys, and rotating components that quickly throw clear conventional spray lubricants.
Wide Temperature Range -25°C to 165°C: Active across a wide operating temperature range from -25°C to 165°C, covering cold storage and refrigeration conveyor applications, standard ambient industrial and agricultural environments, and high-temperature engine bay and industrial chain drive conditions where standard lubricants degrade.
Resists Cold, Hot, and Salt Water Washoff: Maintains lubrication in wet operating environments including marine vessel applications, outdoor conveyor systems, agricultural machinery subject to rain and irrigation, and equipment subject to regular high-pressure washdowns.
Sling-Off Resistant: The adhesive formulation resists centrifugal sling-off forces generated by fast-moving chain and drive components, maintaining the lubricant film on the chain surface for longer between application intervals compared to conventional spray lubricants.
Reduces Wear and Friction: Lubricates internal chain pin and bushing contact surfaces, reducing metal-to-metal wear at the primary chain wear points and lowering drive friction, contributing to extended chain and sprocket service life and reduced drive energy consumption.
Reduces Noisy Chain Systems: Metal-to-metal contact between inadequately lubricated chain pins, bushings, and drive sprockets is a common source of chain drive noise. Regular application of Tac 2 maintains the lubricant film at contact surfaces, dampening noise and providing a smoother, quieter drive.
Stable and Long-Lasting: The adhesive film provides a more durable lubrication interval than conventional spray lubricants, reducing the frequency of reapplication required on chain drives and wire rope systems in regular service.
Wide Application Range: Suitable for chain drives, open gears, pulleys, wire ropes, conveyors, and any open drive system requiring a penetrating, adhesive lubricant that will remain in place under demanding operating conditions.
Technical Specs
| Specification | Detail |
|---|---|
| Part Number | 5035 |
| Contents | 300g |
| Format | Aerosol Spray |
| Lubricant Type | Adhesive Penetrating Lubricant |
| Operating Temperature | -25°C to 165°C |
| Washoff Resistance | Cold, Hot, Salt Water |
| Sling-Off Resistant | Yes |
| Applications | Chain Drives, Open Gears, Wire Ropes, Pulleys, Conveyors |
| Warranty | Manufacturer's Defect |
Compatible With / Goes Well With
The CRC 5035 Tac 2 is suited to any automotive, industrial, agricultural, or marine application requiring a heavy-duty penetrating adhesive chain and drive lubricant. Primary applications include motorcycle and bicycle chain drives, automotive and agricultural timing and drive chains, industrial conveyor chain systems, open gear drives on mining and processing equipment, wire rope rigging and hoisting equipment on marine vessels and cranes, agricultural machinery drive chains, forklift and materials handling chain drives, and any open drive system subject to wet, high-temperature, or high-speed operating conditions.
Pairs well with CRC 5013 Auto Electronic Cleaner for a complete workshop chemical maintenance kit, CRC chain degreaser and drive cleaner for removing old lubricant and contamination before reapplying Tac 2, anti-corrosion sprays for complementary metal protection alongside lubrication, and workshop chemical storage solutions for safe aerosol product storage.
Frequently Asked Questions
What makes the Tac 2 different from a standard spray lubricant like WD-40 or chain oil?
Standard spray lubricants and penetrating oils typically use a light-viscosity carrier that provides short-term lubrication but lacks the adhesive properties to remain on fast-moving chain and drive surfaces. WD-40 in particular is primarily a water displacer and light penetrant rather than a heavy-duty chain lubricant. The CRC Tac 2 is formulated to penetrate deeply into chain pin and bushing areas before thickening into an adhesive film that resists sling-off and washoff under demanding operating conditions, providing significantly longer-lasting lubrication at the internal wear surfaces of chain drives and wire ropes.
How often should the Tac 2 be applied to chain drives?
Application frequency depends on the operating conditions, chain speed, load, and environment. As a general guide, chains operating in dirty, wet, or high-temperature environments require more frequent application than lightly loaded chains in clean, dry conditions. For most standard chain drive applications, applying Tac 2 at regular service intervals or when audible chain noise returns is a practical maintenance approach. For high-duty cycle industrial and agricultural chain drives, follow the equipment manufacturer's recommended lubrication interval and adjust based on observed lubricant condition during maintenance inspections.
Can the Tac 2 be used on motorcycle chains?
Yes. The Tac 2's penetrating adhesive formula, sling-off resistance, and wide temperature range make it well suited to motorcycle chain drives, which operate at high speeds and are exposed to road grime, water, and temperature extremes. Apply to a clean, dry chain with the motorcycle on a stand, rotating the wheel to work the spray around the full chain run and allowing the carrier to evaporate before riding.
Is the Tac 2 suitable for wire rope and rigging applications?
Yes. The penetrating carrier solvent carries the lubricant between the individual wire strands of wire rope where internal wear between strands occurs during bending cycles over sheaves and drum surfaces. The resulting adhesive film resists washoff from marine environments, rain, and humidity, making the Tac 2 suitable for hoisting wire ropes, rigging cables, and wire rope on marine vessels, cranes, and lifting equipment subject to wet operating conditions.
What temperature range is the Tac 2 suitable for?
The CRC Tac 2 is active across a wide operating temperature range from -25°C to 165°C. At the lower end, this covers cold storage and refrigeration conveyor applications and cold-climate outdoor machinery. At the upper end, the 165°C upper limit covers engine bay chain drives, industrial oven conveyor chains, and high-temperature processing equipment chain systems where standard lubricants would thin out, oxidise, or burn off. Always confirm the specific operating temperature of your application falls within this range before using the Tac 2.
